0

Your Cart is Empty

VESC-4.12 Official original version All original components

 

Official original version,Hardware version 4.12,compatible with VESC TOOL, firmware version 3.50, can be used for model, multi-axle vehicle, electric vehicle, electric skateboard, golf car, intelligent car, robot, and simple industrial position control.

- Hardware: V 4.12

- Firmware: V3.63

- Voltage: 8V - 60V (2S to 12S LiPo safe).

- Voltage spike should not exceed 60V!

- Current: Continuous 50A, maximum instantaneous pulse 100A. 

- 5V 1.5A Output

- 3.3V 1A Output

- Mode: DC, BLDC, FOC (sinusoidal)

- Supported sensors: ABI, HALL, AS5047

 

- Regenerative braking

- Traction control (single and double settings)

- Sensorless or Sensorless Operations + Mixed Mode

- Configurable RPM, Current, Voltage and Power Limitations

- Input source: PPM, simulation, NRF Nyko Kama Nunchuck

- Communication Port: USB, CAN, UART

- Throttle Curve and Slope of All Input Sources

- Separate acceleration and brake throttle curves

- Seamless Four Quadrant Operation

- Motor speed, ampere hour, watt hour count

- Real-time data analysis and readout through communication ports

- Adjustable protection:

- Low input voltage

- High input voltage

- High motor current

- High input current

- High regenerative braking current (motor and input limit separately)

- High Speed (Individual Restriction in Each Direction)

- Overtemperature protection (MOSFET and motor)